Traversing walls are a great way to convert a plain wall into an exciting opportunity. Our traverse wall incorporates holds and fixings fitted to an existing solid internal or external wall. We will...

Traversing wall panel, 2.4m height x 1.2m width, which can be installed onto a solid structure (eg a wall or fence) inside or outside to provide a solid flat plane for fixing holds where individual...

Our bouldering walls are a great way to convert an existing plain wall into an exciting challenge. We install holds and fixings onto an existing brick wall not exceeding 2m high (this will require...

Our climbing walls are a great way to convert an existing plain wall into an exciting challenge. We install holds and fixings onto an existing brick wall (picture shows a 6m high x 5m wide climbing...

Our climbing wall panels are a great way to convert an existing plain wall or structure into an exciting challenge where it is not possible to install individual holds or where different inclines are...

Climbing wall consisting of freestanding panels on frames which can be linked together to form a triangle, square, rectangle, pentagon or hexagon or simply fixed flat to the wall. These are really...

Climbing wall holds are supplied in various different sizes and shapes. All feature a moulded resin hold with a highgrip surface and bolt hole (2 on larger holds to stop them turning). These holds...

Set of 48 climbing wall holds for club use in different sizes and shapes. All feature a moulded resin hold with a highgrip surface and bolt hole (2 on larger holds to stop them turning). Holds feature...

Climbing wall holds shaped as the letters of the alphabet to make learning fun! These are excellent for school traversing walls as they extend learning into the playground.All feature a moulded resin...

Climbing wall holds shaped as numbers to make learning fun!. All feature a moulded resin hold with a highgrip surface and bolt hole (2 on larger holds to stop them turning). Holds feature an internal...

6mm allen key with a T handle for tightening holds onto a wall. The T bar enables the hold to be tightened sufficiently for safe use but helps prevent overtightening which can lead to cracked holds...

Countersunk M10 bolt for fixing holds to the wall or panel. These are available in 35mm, 50mm or 70mm lengths depending on the type of wall and fixing used. The wall or panel must have the correct...

Special expansion anchor for fitting into brick or block walls for installing climbing wall holds. These should be professionally installed with the fitting tool to ensure the correct expansion has...

High friction paint for painting brick or block walls to improve the look and feel for climbing and traversing walls. Climbing wall paint is available only in white, yellow, red, blue, green, light...

A special PVC covered mat for climbing walls with a sandwich construction foam with 20mm polyethylene foam on either side of a polyurethane core.This provides a firmer base than standard crash mat...

The junior boulder is a challenging boulder for climbing and traversing suitable for ages 5 - 11. The boulder features a 13m2 climbing area with 6 hold fixings per m2. The boulder can be lifted by 2...

The adventure boulder offers a more challenging climbing and traversing opportunity for older children (11+). The boulder features a 40m2 climbing area with 6 hold fixings per m2. The boulder is on...

A mobile climbing tower which is permanently fitted to a trailer and can be transported anywhere. The tower is raised in 15 minutes by hydraulics activated by an electric pump. The tower has 4...

Friction belay for use on climbing walls which removes the need for a belayer. The device is fitted to the belay point and the belay rope pulled out to attach to the climber. If the climber falls at...

Stainless steel 12mm locking karabiner for use with belay points. This has a screw barrel lock for safety.

The belay brake, Grigri, is an Auto braking device for belayers. If a fall occurs the pivoting cam inside the device facilitates braking. The Grigri is attached to the belayer's harness with the belay...

Dinamic 10.5mm diameter low stretch climbing rope. Belay ropes must be used with the correct size carabiner through which they pass. We recommend a belay rope 2.5 to 3 times as long as the climbing...

Single point fixed belay with a stainless steel fixing plate and ring. A karabiner is normally fitted to the ring and the belay rope then passes through the carabiner. This should normally be...

Equal Y hang belay point with 2 stainless steel fixing plates and equal length chains leading to the main ring to which a 12mm karabiner is attached through which the belay rope then passes. This...

Offset Y hang belay point with 2 stainless steel fixing plates and equal length chains leading to the main ring to which a 12mm karabiner is attached and through which the belay rope then passes. This...

4 point steel belay plate consisting of a steel plate with 2 welded nuts in the centre (for attaching an equal Y hang belay - which should be ordered separately) and a hole in each corner for...

Lightweight adjustable webbing harness for climbers and belayers with precise adjustment with double back buckles on the waist belt and leg loops. Suitable for children over 9 years to adults (sizes 1...

Lightweight and robust helmet, injection moulded polycarbonate with expanded polypropylene foam inner for protection. These are available in white, blue and orange with an adjustable strap at the back...